HDfury integral Input Switching and Matrix mode
Input Switch / Matrix Mode Button allow you to switch active inputs or enter/exit the Matrix mode.
[Short Press] will switch the active input channels in Splitter Mode and swap/cross signals in Matrix mode.
[Long Press] (over 2sec) will enter/exit the Matrix Mode (only available for signals up to 4K30 4:4:4 300MHz or 4K60 4:2:0 300MHz).
Blue LEDs on the unit will show the active input channel (when one LED is ON) or Matrix Mode (when both LEDs are ON).
Note for Matrix Mode: It is only available for signals up to 300MHz (max 4K30 4:4:4 or 4K60 4:2:0). Input in this mode is limited to one HDCP 2.2 stream; the other must be HDCP 1.4 or DVI-D.